Click image to enlarge
|
|
|
|
| Product Code: |
1GOWG |
| Description: |
GAL ORIGINAL WOOD GLUE FI50601 |
| |
|
|
|
|
|
Details
Titebond®
Original Wood Glue
5066 - Gallon
|
Product Downloads:
Material Safety Data Sheet
Technical Bulletin |
|
Titebond Original Wood Glue is the industry standard for general woodworking applications. This original aliphatic-resin glue has been the preferred choice of professionals for over 50 years. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes. It provides excellent resistance to heat, solvents and mildew.
Titebond Original can help any woodworker achieve professional-looking results. It is ideal for both hardwoods and softwoods, hardboard, particleboard, leather, cloth and most other porous materials. Titebond Original is easy to use, non-toxic and cleans up with water.
Physical Properties
Type: Aliphatic resin emulsion
State: Liquid
Color: Yellow
Dried Film: Translucent
Freeze/thaw stability: Stable
Viscosity: 3,200 cps
Storage life: 12 months in tightly closed containers at 75º F.
Calculated VOC: 10.7 g/L
Weight/gallon: 9.2 lbs.
Chalk temperature: *Approximately 50ºF.
Solids: 46%
Flashpoint: >200ºF.
pH: 4.0
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
|
Application Guidelines
Application Temperature
Above 50°F.
Open assembly time
5 minutes (70°F./50%RH)
Total assembly time
10-15 minutes (70°F./50%RH)
Minimum required spread
Approximately 6 mils or 250 square feet per gallon
Required clamping pressure
Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application
Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup
Damp cloth while glue is wet. Scrape off and sand dried excess. |
|
|
Limitations
Titebond Original Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN. |
|
|
Specifications
PART #5066** PKG GALLON 2 PER CASE **
|
